DESCRIPTION
Bead- and column-based separation methods rely carefully on the tempo and ease of affinity binding applications. Ligands resembling streptavidin, antibodies and lectins are used every to grab specifically-tagged targets and for the isolation of cells and biomolecules that naturally categorical the ligand binding companion.
The distinctive saccharide-binding properties of plant lectins, resembling Concanavalin A (Con A) have made them useful for the labeling and isolation of glycanpresenting cells and glycoproteins in serum and cell lysate. Lectins have furthermore been utilized in cell adhesion analysis, to affect lymphocyte activation, and to find carbohydrate-based therapeutics.
concanavalin a cona
Our Con A-coated BioMag Plus microparticles current a helpful means for isolating mannosyl- and glucosyl-containing glycoproteins and polysaccharides from serum or cell lysate, or for investigating totally different lectin glycan-mediated processes. BioMag Concanavalin A has moreover been used for CUT&RUN, a chromatin profiling protocol that has numerous key advantages over ChIP. (see References)
Indicate diameter: ~1.0µm
Focus: 5 mg/mL
Con A certain: Determined by A280
MATERIAL
Supplies Outfitted
3mL or 10mL of Con A coated particles in 10mM PBS with 0.1% sodium azide
Supplies Required
1.5mL or 2mL microcentrifuge tubes
Mammalian serum: 0.4mL of a 1:20 dilution in PBS / check out
Binding Buffer: 1x PBS + 0.1% NaN3
+ 1mM MgCl2
+ 1mM MnCl2
+ 1mM CaCl2
(pH 7.4)
Wash Buffer: 1x PBS + 0.1% NaN3
+ 1mM MgCl2
+ 1mM MnCl2
+ 1mM CaCl2
(pH 7.4) + 0.1% Tween 20
Con A particle Elution Buffer: 5mM Tris (pH 8.0) + 0.15M NaCl + 0.05% SDS + 1M Glucose
Precision pipets with disposable methods to ship 20-200µL, 200-1000µL
Microcentrifuge Tube Separator:1.5mL Magnetic Separator (Catalog Code LS001)BioMag Multi-6 Microcentrifuge Tube Separator (Catalog Code MS002)
Vortex mixer and tube rotator.
PROCEDURE
Researchers are steered to optimize use of particles in any utility.
1. Put collectively 0.4mL of serum sample by diluting 1:20 with 10mM PBS.
2. Change 1mL of BioMag Plus Con A particles to a transparent microcentrifuge tube. Place the tube on a magnet to separate the particles from decision.
Rigorously take away and discard the reply.
3. Wash the particles by together with 1mL of Binding Buffer. Mix correctly.
4. Repeat the particle wash 1 additional time. After the ultimate wash, take away the supernatant.
5. Add 0.1mL of Binding Buffer to the serum sample from Step 1. Add the sample to the particles and mix correctly by inversion or vortex to resuspend the particles.
6. Place the sample on a tube rotator and mix for 10-30 minutes at room temperature.
7. Take away the sample from the rotator and place in a magnetic separator. Rigorously take away the cleared supernatant.
8. Wash the particles by together with 0.5mL of Wash Buffer. Mix correctly by inversion or by vortex mixing.
9. Repeat Steps 7-8. Resuspend the particles with 0.5mL of Wash Buffer and place on tube rotator for 5 minutes.
10. Repeat Steps 7-9.
11. Substitute the tube of particles on the magnetic separator and punctiliously take away / discard the supernatant.
12. Add 250µL of Elution Buffer to the particles. Mix the tube to resuspend the particles and place the tube on rotator for 10-30 minutes at room temperature.
13. Substitute the tube of particles on the magnetic separator and punctiliously take away the eluate and swap to a transparent microcentrifuge tube for later use or storage.
14. Repeat Steps 12-13. Eluates is also pooled and precipitated. Retailer eluates on ice for fast use or freeze for long-term storage.
NOTES
• Avoid the utilization of reagents with EDTA or totally different metallic chelators, as this may reduce the effectiveness of the Binding Buffer.
• Protease Inhibitors is also used when delicate glycoproteins are isolated.
• Low glycoprotein restoration is also linked by each rising the elution incubation time previous 10 minutes, and / or by boiling particles in 200µL of
SDS-PAGE sample buffer for 5 minutes after which magnetically separating the particles from the eluate. (Bear in mind: Boiling might detach some lectins and can
moreover launch nonspecifically certain proteins.)
• Run eluate samples on an SDS-PAGE 4-20% Tris-Glycine electrophoresis gel and stain the glycoprotein bands using the GlycoGel Stain Tools
(Polysciences’ Catalog Code 24693) to visualise.
• After GlycoGel staining, stain the gel using Coomassie G250 (1mL or 2mL of 0.5% Coomassie G250 in 50% methanol and 10% acetic acid) to visualise
totally different protein bands.
• The eradicating of albumin and IgG from serum samples might improve the isolation of low focus glycoproteins. If desired, use the BioMag ProMax
Albumin Eradicating Tools (Catalog Code BP658) and / or the BioMag ProMax Serum IgG Eradicating Tools (Catalog Code BP659).
| Catalog Amount | Description | Focus (mg/mL) | Amount (mL) | Product Data Sheet | Safety Data Sheet |
|---|
| BM551 | BioMag Streptavidin | 5 | 5, 50 | PDS 551.pdf | SDS MB232.pdf |
| BP628 | BioMag Plus Streptavidin | 5 | 10 | PDS 621.pdf | SDS MB232.pdf |
| BM568 | BioMag Streptavidin Nuclease-free | 1 | 10, 25 | PDS 530.pdf | SDS MB232.pdf |
| BP621 | BioMag Plus Streptavidin/Biotin Binding Tools | 5 | 5 | PDS 621.pdf | SDS MB232.pdf
SDS MB255 Wash/Coupling Buffer.pdf |
) Concanavalin A (ConA) |
| 05-0106-100000 | Medicago | 100 g | Ask for price |
Concanavalin A (ConA) |
| 05-0106-250 | Medicago | 250 mg | EUR 105.6 |
Concanavalin A (ConA) |
| E16FXP010 | EnoGene | 1 mg | EUR 86.67 |
Description: Available in various conjugation types. |
 Antibody) Concanavalin A (ConA) Antibody |
| abx101152-100l | Abbexa | 100 µl | EUR 287.5 |
Concanavalin A (ConA) Antibody |
| abx101152-1ml | Abbexa | 1 ml | EUR 850 |
Concanavalin A (ConA) Antibody |
| abx101152-200l | Abbexa | 200 µl | EUR 375 |
 CLIA Kit) Concanavalin A (ConA) CLIA Kit |
| 20-abx190017 | Abbexa | - Ask for price
- Ask for price
- Ask for price
| - 96 tests
- 5 × 96 tests
- 10 × 96 tests
|
- Shipped within 5-7 working days.
|
 ELISA Kit) Concanavalin A (ConA) ELISA Kit |
| abx052181-100g | Abbexa | 100 µg | EUR 5400 |
Concanavalin A (ConA) ELISA Kit |
| abx052181-10g | Abbexa | 10 µg | EUR 600 |
Concanavalin A (ConA) ELISA Kit |
| abx052181-50g | Abbexa | 50 µg | EUR 2850 |
Concanavalin A (ConA) ELISA Kit |
| 20-abx150329 | Abbexa | - Ask for price
- Ask for price
- Ask for price
| - 96 tests
- 5 × 96 tests
- 10 × 96 tests
|
- Shipped within 5-7 working days.
|
Concanavalin A (ConA) ELISA Kit |
| MBS9308968-10x96StripWells | MyBiosource | 10x96-Strip-Wells | EUR 6725 |
Concanavalin A (ConA) ELISA Kit |
| MBS9308968-48StripWells | MyBiosource | 48-Strip-Wells | EUR 550 |
Concanavalin A (ConA) ELISA Kit |
| MBS9308968-5x96StripWells | MyBiosource | 5x96-Strip-Wells | EUR 3420 |
Concanavalin A (ConA) ELISA Kit |
| MBS9308968-96StripWells | MyBiosource | 96-Strip-Wells | EUR 765 |
 Antibody Pair) Concanavalin A (ConA) Antibody Pair |
| abx370219-100g | Abbexa | 100 µg | EUR 1062.5 |
Concanavalin A (ConA) Antibody Pair |
| 20-abx370219 | Abbexa | - Ask for price
- Ask for price
| - 5 × 96 tests
- 10 × 96 tests
|
- Shipped within 5-15 working days.
|
 Antibody (Biotin)) Concanavalin A (ConA) Antibody (Biotin) |
| 20-abx271751 | Abbexa | - Ask for price
- Ask for price
- Ask for price
- Ask for price
- Ask for price
| - 10 ug
- 50 ug
- 100 ug
- 200 ug
- 1 mg
|
- Shipped within 5-15 working days.
|
Concanavalin A (ConA) Antibody (Biotin) |
| abx271751-1ml | Abbexa | 1 ml | EUR 937.5 |
Concanavalin A (ConA) Antibody (Biotin) |
| abx271751-200l | Abbexa | 200 µl | EUR 400 |
) CLIA Kit for Concanavalin A (ConA) |
| SCC179Ge | Cloud-Clone | 96Т | EUR 816 |
|
 Cat Concanavalin A,ConA ELISA KIT |
| JOT-EK0034Cat | Jotbody | 96 wells | Ask for price |
Description: Cat |
 Cat concanavalin A, ConA ELISA Kit |
| MBS1602679-10x96StripWells | MyBiosource | 10x96-Strip-Wells | EUR 4295 |
Cat concanavalin A, ConA ELISA Kit |
| MBS1602679-48StripWells | MyBiosource | 48-Strip-Wells | EUR 410 |
